Assembly & Installation: 49012 | 11w LED Grow Light Bulb

Troubleshooting Guide:

Cleaning Instructions:

1. Turn power OFF.
2. Use a soft cloth and a mild, non-abrasive glass cleaner.
3. Lightly wipe and clean the fixture.

DO NOT use solvents. DO NOT use cleaners containing abrasive ingredients. NEVER spray cleaning liquid directly onto the LEDs, fixture, or wiring.

Eyes

• Do not look directly at the LED lights for any length of time.
• Do not shine the light directly into other people's eyes.

Warranty

This product is guaranteed against failure due to factory defects in materials or workmanship for one (1) year from the date of purchase. This warranty is non-transferable and applies only to the original owner. Proof of purchase required for repair or replacement. This warranty does not cover normal wear of parts or damage resulting from misuse of the product. Misuse of the product includes but is not limited to: using in extreme weather conditions, opening the housing of the product, or attempted remodel/alterations made to product.

Question/Comment/Missing Part? (510) 922-9758 | backtotheroots.com/faq | contact@backtotheroots.com

Back to the Roots

Warning: To avoid risk of electrical shock, shut off power before installing or servicing this fixture

Assembly & Installation: 49012 | 11w LED Grow Light Bulb

• Color temperature: 4000K
• Lumens: 1000LM
• Watts: 11W
• Operating Voltage: AC120V
• Base: E26/ Standard Edison Base
• Dry Rated
• LED Emitter Life: 25,000 hours
• Operating temperature: -4 °F to 86 °F (-20 °C to 30 °C)
• Not rated for enclosed fixtures.
• Bulb size: 4.25" tall, 2.36" wide

Warning

• When using product, basic precautions should always be followed.
• Read and follow these instructions and observe all warnings.
• Carefully read and understand the information given in this manual before beginning installation. Failure to do so could lead to electric shock, fire, or other injuries which could be hazardous or even fatal.
• Save these instructions and warnings.

This product may present a possible shock or fire hazard if improperly installed or mounted. Products should be installed following these instructions, local electrical codes, and the current National Electric Code (NEC).

Caution

• NEVER submerge this product in water!
• Do not use in on hot surfaces.
• Do not remove the lens protecting the LED.
• Do not use in areas near a gas source.
• It is NOT possible to change the LED light source.
• This light is not intended for use in potentially explosive environments. This is NOT a vapor proof light.
• This work light is NOT A TOY and is not suitable for use by children.

Question/Comment/Missing Part? (510) 922-9758 | backtotheroots.com/faq | contact@backtotheroots.com